SMC CHILLER HRZ004-L-X002 3 Months Warranty with Working

Full load Amps.: 25A

Refrigerant: HFC404A 1.3kg

etc: kwon181220

Cooling method: Water cooled refrigerant

Dimensions (mm): 380(W) x 870(D) x 950(H)

Model: HRZ004 L X002

Name of Product: CHILLER

Weight: 175kg(Net Weight)

MPN: HRZ004-L-X002

Brand: SMC

Power Line: 3-phase AC200/200 ~ 208V±10% 50/60Hz

Phase.Wire: 3Phase, 3Wire + G Line

CAPACITY(AIC): 14kA

• Model : HRZ004-L-X002
  
  
• Manufacturer : SMC
  

• Specifications
  Cooling method : Water cooled refrigerant
  Circulating Fluid : Galden® HT135★3) Fluorinert™ FC-3283★3)
  Cooling Capacity★1) (kW) : 4.0 (At -10°C)
  Operating temperature range: -20°C ~ 40°C
  Temperature stability : ±0.1°C★2)
  
  Refrigerant : R404A(HFC) (CFC Free)
  Quantity of refrigerant : 1.3kg
  Pump capacity★4) (MPa) : 0.45 /0.65 (At 20L/min)
  Main Tank capacity★5) (L) : Approx.15 (4 [gal])
  Sub Tank capacity★6) (L) : Approx.16 (4.2 [gal])
  
  Circulating fluid port : Rc 3/4
  Facility water (°C/MPa) : 10 to 25 / 0.3 to 0.7 (45 to 100 [PSIG])
  Required flow of facility water (L/min) : 15/22
  Facility water port : Rc 1/2
  Power supply : 3-phase 50/60Hz AC200/200 to 208V±10%
  
  Main breaker size (A) : 30
  Communication : Serial RS-485 (Dsub-9pin), Contact signal (Dsub-25pin)
  Phase.Wire : 3Phase, 3Wire + G Line
  Full load Amps : 25A
  CAPACITY (AIC) : 14kA
  

• Warranty : 3 Months
  
  
• Dimensions (mm) : 380(W) x 870(D) x 950(H)
  
  
• Weight : 175kg(Net Weight)
  
  ★1) The capacity is derived under the conditions that the facility water temp. is 25°C and that the circulating fluid flow rate is obtained at a specified flow rate of pump capacity.
  　 　 Applied to 50 / 60Hz.
  ★2) This is a system output temperature, with flow rate defined in pump capacity secured, when stabilized with no disturbance.
  　 　 It's upper limit may be violated if an insufficient amount of the circulating fluid is present or a disturbance to flow rate is observed.
  ★3) Galden® is a registered trademark of Solvay Solexis, and Fluorinert™ is a trademark of U.S. 3M.
  ★4) The capacity is derived at the Outlet of this system when the circulating fluid temp. is at 20°C.
  ★5) This is a minimum amount of the fluid for operation of the Thermo Chiller outfitted with internal piping and heat exchanger in this system.
  　 　 Circulating fluid temp.: 20°C
  ★6) This is an auxiliary space with a main tank capacity excluded. Available for circulating fluid recovery from external piping and backup supply.
  
  
• AutomotiveAPro
  AutomotiveAPro is expertly crafted.new and in perfect condition. and send in a package.
  We make every attempt to use accurate photos that show fine detail for each piece.
  As each computer monitor is different. colors may vary slightly from pictures.
  We inspect each piece for quality prior to shipping and guarantee that you will be satisfied.
  We try to get excellent feedback for glowing customer reports!
  
  
• Our Service
  Communication : We will answer your questions within 48 hours(eBay message Only)
  Delivery : After We received your payment. we will post your item in 24 hours if the stock available.
  Sorry, we don't,ship item and answer your question on holiday & weekend
  
  
• Payment
  Payment by Paypal Only(NO accept any other payment).
  Buyers must pay postage & handing costs.
  Postage & handing costs are not refundable.
  
  
• Shipment
  We are based in South Korea. Shipment by international Air Mail from South Korea.
  Note : See Shipping Condition
  
  
• Delivery time
  international Air Mail  : It normally take 10 - 15 business days for delivery (up to 15 business days)
  Note: Brazil, Egypt, Australia, France, Puerto Rico.. Some Countries buyer need extra Costs.
  Because EMS length limitation 105cm
  
  
• Feedback
  We will leave a feedback within 5 days after received your feedback.